Live

VIN Decode

2007 HYUNDAI Santa Fe VIN Decode

VIN: KMHSH81DP7U139054

VIN KMHSH81DP7U139054 decodes as a 2007 HYUNDAI Santa Fe, a passenger car, built in Ulsan, SOUTH KOREA. This free VinWhere page shows the factory decode — year, make, model, trim, engine, drivetrain, fuel type, and assembly location — plus window-sticker availability and the NHTSA safety recalls reported for this year, make, and model. Vehicle data only: no owner names, addresses, or DMV records.

Free VIN decode result

Year
2007
Make
HYUNDAI
Model
Santa Fe
Trim
CMA
Body
Passenger Car
Engine
2.7L
Drive type
—
Fuel
Gasoline
Built in
Ulsan, SOUTH KOREA

Window sticker availability

Original window sticker

Available — view

Safety recalls

9 reported — see below

Safety recalls

NHTSA lists 9 recalls reported for the 2007 HYUNDAI Santa Fe. Recall campaigns apply to a year, make, and model — not a specific VIN — so confirm whether this vehicle is affected and unrepaired at NHTSA.gov/recalls.

  • SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

    Hyundai Motor America (Hyundai) is recalling certain 2007-2010 Elantra and 2009-2011 Elantra Touring vehicles. On February 21, 2020 Hyundai expanded the recall to include 46,425 model year 2007-2008 Entourage and 2007 Santa Fe vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short.

    Remedy: Hyundai will notify owners, and dealers will install a relay in the vehicle's main junction box to prevent the risk of an ABS short-circuit while the car is turned off, free of charge. The recall began April 2, 2020. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 188.

    NHTSA campaign 20V061000 · reported 05/02/2020

  • EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

    HYUNDAI IS RECALLING 532,633 MY 2006-2007 ACCENT, ENTOURAGE, SONATA, MY 2007 AZERA, ELANTRA AND SANTA FE, MY 2005-2007 TUCSON AND MY 2007-2008 VERACRUZ VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY ALSO AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF THE PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.

    Remedy: DEALERS WILL REPLACE THE STOP LAMP SWITCH FREE OF CHARGE. THE RECALL BEGAN ON JUNE 29, 2009. OWNERS MAY CONTACT THE HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.

    NHTSA campaign 09V122000 · reported 15/04/2009

  • EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

    Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate.

    Remedy: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.

    NHTSA campaign 13V113000 · reported 01/04/2013

  • AIR BAGS:FRONTAL

    HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2007-2008 HYUNDAI VERACRUZ VEHICLES MANUFACTURED FROM DECEMBER 26, 2006, THROUGH MARCH 21, 2008, AND MODEL YEAR 2007-2008 HYUNDAI SANTA FE VEHICLES MANUFACTURED FROM APRIL 19, 2006 THROUGH MARCH 20, 2008. THE CLOCK SPRING CONTACT ASSEMBLY FOR THE DRIVER'S AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) MAY BECOME DAMAGED THROUGH USAGE OVER TIME. THE DRIVER'S AIR BAG ELECTRICAL CIRCUIT WILL EXPERIENCE A HIGH RESISTANCE CONDITION, POTENTIALLY CAUSING THE DRIVER'S AIR BAG TO NOT DEPLOY.

    Remedy: HYUNDAI DEALERS WILL REPLACE THE VEHICLE'S DRIVER'S AIR BAG CLOCK SPRING CONTACT ASSEMBLY FREE OF CHARGE. THE SAFETY RECALL BEGAN IN NOVEMBER 2011. OWNERS MAY CONTACT HYUNDAI CUSTOMER CONNECT CENTER AT 1-800-633-5151.

    NHTSA campaign 11V472000 · reported 09/09/2011

  • AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE

    Hyundai is recalling certain model year 2007 through 2009 Santa Fe vehicles manufactured from April 19, 2006, through July 7, 2008. The occupant classification system (OCS) may need recalibration to accurately detect small statured adults.

    Remedy: Hyundai will notify owners, and dealers will update the classification software free of charge. The safety recall began on September 7, 2012. Owners may contact Hyundai at 1-800-633-5151.

    NHTSA campaign 12V354000 · reported 25/07/2012

  • TRAILER HITCHES

    THIS RECALL HAS BEEN SUPERCEDED BY RECALL 08E-055. HYUNDAI IS RECALLING 3,387 TRAILER HITCH WIRING HARNESSES EITHER INCLUDED WITH A TRAILER HITCH OR SOLD AS A SERVICE PART MANUFACTURED BY THULE TOWING SYSTEMS AND DISTRIBUTED BY HYUNDAI FOR INSTALLATION ON MY 2007-2008 SANTA FE AND VERACRUZ VEHICLES. THE ACCESSORY TRAILER HITCH WIRING HARNESS CONVERTER MODULE IS MOUNTED TO THE TOP SURFACE OF THE REAR BUMPER REINFORCEMENT. HIGH CURRENT LEAKAGE OR A SHORT CIRCUIT OF CAPACITOR C1 COULD CAUSE HEAT RELATED DAMAGE TO THE WIRING HARNESS CONVERTER MODULE.

    Remedy: HYUNDAI WILL NOTIFY OWNERS AND WILL REPLACE THE TRAILER HITCH WIRING HARNESS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 31, 2008. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.

    NHTSA campaign 08E016000 · reported 07/02/2008

Source: NHTSA vehicle safety recalls. Data reflects campaigns reported for this year, make, and model.

VIN structure

WMI (1–3)

KMH

Manufacturer & country

VDS (4–9)

SH81DP

Vehicle descriptor + check digit

VIS (10–17)

7U139054

Year, plant & serial

Keep exploring

Free VIN decode vs. optional full report

This page shows a free factory VIN decode and NHTSA recall summary. A full vehicle report is different and may include deeper buyer-research data when available. The full report is optional and is not required to use VinWhere.

VinWhere uses public vehicle specification data, including NHTSA vPIC decode data and NHTSA safety-recall data. Some fields may be unavailable depending on the manufacturer, model year, and source.

VIN decode FAQ

What vehicle is VIN KMHSH81DP7U139054?+

VIN KMHSH81DP7U139054 decodes as a 2007 HYUNDAI Santa Fe (Passenger Car). VinWhere shows factory specifications only — no owner names, addresses, or DMV records.

Does the 2007 HYUNDAI Santa Fe have any safety recalls?+

NHTSA reports 9 safety recalls for the 2007 HYUNDAI Santa Fe (reported by model, not by VIN). Recall campaigns are issued by year, make, and model rather than by individual VIN, so confirm this specific vehicle's status at NHTSA.gov/recalls.

Is the window sticker available for 2007 HYUNDAI Santa Fe?+

Yes, the original window sticker may be available for this VIN, including MSRP, installed options, and standard equipment when available.